2 Conditions You Can Control To Keep Mold Out Of Your House


If you have chronic allergies, your symptoms probably worsen when there are high pollen counts in the air, and when you are around mold. While you cannot control the amount of pollen that exists, you can control the mold inside your home. Mold tends to grow only in certain conditions. If you can prevent these conditions from occurring in your home, you may be able to keep mold away. Here are the two main conditions that must be present for mold to grow and thrive in a house.

The Humidity Level

Mold grows in humid places, and houses can get humid in the summer. The Centers for Disease Control and Prevention (CDC) recommend to keep the humidity level in your house 50% or lower. Humidity levels refer to the amount of water found in the air. When the amount of water gets too high for the air to hold and absorb it, the process of condensation occurs.

Condensation causes moisture to stay on things in your house instead of being absorbed in the air, and bathrooms and kitchens are the two rooms you should be most concerned about when it comes to humidity. If you have a basement, this might be an area of concern too, especially if it is not cooled with your central AC system in the summer.

You can test the humidity level in your home by purchasing a hygrometer. This is a small device you can purchase from most hardware stores. You should check the level often, and when it gets too high you can take steps to reduce it. Here are some ways to reduce the humidity in your home:

  • Run your AC when it is hot outside.
  • Keep your curtains closed when the sun is shining in.
  • Make sure you kitchen and bathrooms have exhaust fans and use them each day.
  • Run a dehumidifier to pull the moisture out of the air.
  • Remove wet linens, carpet, and clothing from your home until it is dry.

These tips should help you control the humidity in your house, which will help keep mold away.


Poor ventilation is another condition that causes mold to grow. Ventilation refers to the ways your house eliminates moisture and heat, and keeps air flowing through it. A well-ventilated home will have a lower chance of developing mold inside, which is what you should aim for.

Ventilation occurs in many ways, but the main factor to good ventilation is good airflow. When air gets trapped in a house and never moves, it becomes stagnant and may contain toxins and allergens. On the other hand, air that is always moving and being replaced with fresh air is more desirable because it contains fewer toxins.

To make sure that your house has the proper ventilation, you should check and repair the following things:

  • Check all exhaust fans – Check your bathroom fans and kitchen fans and make sure they work, and make sure they are working effectively. If you have your bathroom fan on while you shower, within 10 minutes of finishing your shower, your bathroom should no longer be hot or have moisture on the mirrors and sink.
  • Open windows – When the weather cools down, open your windows to allow the outside air to flow in. This will push your stagnant indoor air out.
  • Change your AC filter – During the summer, you may want to change your AC filter several times. This will help control the toxins in the air, which will help spread cleaner air throughout your house.
  • Use an air purifier system – An air purifier system will not only help you keep the air in your house cleaner, but it is also helpful for air circulation.

By following these tips, you might be able to stop mold from growing in your home. Keep in mind, though, if mold is already present, you should hire a mold removal company to clear it out for you. After it is completely gone, you can then begin following these steps to keep the mold away.


17 July 2015

Fixing Your House While Preserving The Artifacts

When you are in the middle of trying to renovate your space, you might be tempted to remove that dated crown molding or trash those antique faucets. After all, since you want your space to look new and minimalistic, who needs that hand-carved ceiling panel or that ornate archway? Unfortunately, if you make the wrong choices, you might end up throwing away valuable or irreplaceable materials. To help you to avoid this mistake, my blog is filled with ideas for how to fix up your home or business without damaging remaining artifacts. By protecting the natural design, you might be able to create a unique space that you will treasure forever.